Texas Instruments DS90UB95x-Q1, Руководство пользователя

Страница: 27 / 54

3.4.4 Error Referring to USB2ANY Firmware Update
Figure 3-26 shows the error message that states that the connected USB2ANY does not have the correct
firmware. To update the firmware, follow the steps below:
Figure 3-26. Error That States That USB2ANY Firmware Must be Updated
Note
Newer versions of the USB2ANY API Library (USB2ANY.DLL) automatically check the firmware
version running on the USB2ANY and update it to the required version automatically, when necessary.
That is the preferred method.
In most cases, the USB2ANY Firmware Loader program is no longer required or recommended. It is
provided only for legacy applications.
1. Run the USB2ANY Firmware Loader program. The installation program will normally create an icon for it on
your desktop. By default, the program will be located in the bin folder of the TI USB2ANY SDK folder (for
example,
C:\Program Files (x86)\TI USB2ANY SDK\bin ).
The program dialog will look like this:
www.ti.com Troubleshooting
SNLU224C – SEPTEMBER 2017 – REVISED APRIL 2021
Submit Document Feedback
DS90UB95x-Q1 Serializer Evaluation Module 27
Copyright © 2021 Texas Instruments Incorporated