I.INSTALLATION
1. Turn off the vehicle (instrument panel off).
2. Locate the OBD connector.
3. Carefully remove any panels protecting the OBD connector.
For further information, please refer to the documentation provided by the
vehicle manufacturer.
4. Connect the diagnostic cable to the
DIAGNOSIS
connector on the VCI.
5. Connect the diagnostic cable to the vehicle's OBD connector.
6. Make sure the diagnostic cable is secured to the OBD connector in order to avoid any
accidental disconnection during use.
7. Position the VCI and the diagnostic cable properly.
An improper positioning of the VCI and/or diagnostic
cable may expose to the risk of hindrance to driving, and
in particular to the activation of safety devices.
Position the VCI and the diagnostic cable so that they do
not compromise driving or the proper operation of safety
devices.
Make sure the electric cables, the wiring in general, the
fuel hydraulic pipes and the safety pneumatic devices of
the vehicle are not damaged during the installation.
8. Fasten the VCI and the diagnostic cable properly.
46
