11.1.4 Cigar lighter cable
The VCI can be powered by the battery in the vehicle being tested using the
PWR
connector.
The image is only an example: the position of the cigar lighter
socket may change based on the vehicle being tested.
Always refer to the documentation supplied by the vehicle
manufacturer for the positioning and correct access to the
cigar lighter socket.
Make sure the cigar lighter socket is powered even when the
ignition key is on OFF (instrument panel off).
Proceed as follows:
1.
Connect the cigar lighter cable to the PWR connector.
2.
Connect the cigar lighter cable to the cigar lighter socket in the vehicle being tested.
In this case the
green LED
on the connector for the lighter socket will also turn on.
The VCI displays the following screen if no communication modes with the display unit have
been configured.
30
