50
Symptom
Remedy
1. Buy a newer TV with and A/V, S-Video or Component Video Input.
2. You may try using your VCR's jacks, but the colour may be distorted due to
Macrovision licensed DVD protection (against copying discs).
3. Your dealer can sell you an RF Modulator which converts the signals for inputting
into the TV's RF input (antenna) jacks. However, your results will never be as
good as a new TV with proper input jacks or it may not work at all.
If your TV set does not have Audio / Video
input jacks .
Pressing any button on the REMOTE control will turn off the screen saver.
Screen saver ball appears on TV screen.
1. Please reset the language to English by following the instructions on Page 26.
2. The disc may have been recorded only in that foreign language.
Menu is in a foreign language.
You can
't copy most discs due to copy protection built into the disc.
1. When the disc is busy loading (or during play), the disc must stop reading the data
and spinning first, then the tray will open. Please be patient, it may take over 30
seconds.
2. If you put a disc into the tray UPSIDE DOWN, the HOME
the data but there will be no data to read. It may take as long as 40 seconds for all
the reading attempts to finish and the door to open.
Can not copy discs to VHS video tapes.
Disc will not eject.
Place fresh batteries into the remote. Or reset the REMOTE by removing the
batteries and holding down a button on the REMOTE for 2 minutes, then
reinserting the batteries.
Double check the battery polarity "
+"
and
" - "
. Negative should touch the spring.
REMOTE will not work.
D
V
D
If a button is pressed too fast over and over, the signals may jam the circuits inside.
To restore to normal, press the OPEN/CLOSE button or remove the AC power plug
for 2 minutes and reinsert to reset the circuits. Also many "copied" discs have this
problem.
Change the picture screen type, see page 25.
Picture is too short.
Picture is frozen.
THEATRE
will try to read
TROUBLE SHOOTING
