To Load and Play a DVD or other Discs
NOTE
: We call any DVD or AUDIO CD a "disc" in this booklet.
When the set is in standby mode (the STANDBY indicator is on) press the
ON/STANDBY button on the main unit or on the remote control
to turn the set on. The STANDBY indicator will turn off.
8
After play, press the OPEN/CLOSE button to open the tray and take the disc out of the tray.
Remember to store the disc in its case to prevent damaging the disc.
9
Press the ON/STANDBY button to return the main unit to STANDBY mode, the STANDBY indicator
on the main unit will light up.
will not be used for a long time (several days), you should unplug
the power cord from the AC socket.
NOTE:
When the player is stopped, the display will show "PRESS PLAY TO CONTINUE
", the
player records the point where the STOP button was pressed (RESUME function). Press
the PLAY/PAUSE button again, playback will resume from this point. If the tray is opened
or
the STOP button is pressed a second time, the resume function will be cleared and the
set is fully stopped.
This is an example of a one-
sided disc. Title is in large
words on the top only.
This is an example of a 2-
sided disc. The title is in very
small words around the
centre spindle.
32
5
Press the VOLUME UP or DOWN button on the main set or VOLUME
or
button on the
REMOTE to adjust the volume level.
Basic Playback 1
NOTE:
The disc door can only open in DVD mode when the
DVD indicator is on.
NOTE:
Refer to Page 23 for
the correct VIDEO
input.
6
Press the STOP button to stop playing.
1
Press the SOURCE button on the front of the DVD HOME
SYSTEM or on the REMOTE to select DVD, the
DVD icon will illuminate
2
Press the OPEN/CLOSE button on the front of the DVD
SYSTEM or on the REMOTE, wait a few
seconds and the disc tray will open.
3
Place a disc gently into the tray with the disc's label facing up
(double-sided discs have contents on both sides, so you can
place the disc either side up). Note: Some discs may also have
the movie one side while director's cuts and special scenes
are on the other side.
4
Press the OPEN/CLOSE or PLAY button, the disc tray will close. The DVD player reads the
disc's table of contents (this may take a few seconds) with a loading icon " " showing on
the left corner of the screen, and then one of three things happens depending how the disc was
programmed:
•
The disc starts playing automatically.
•
The disc menu appears on the screen. One of the options will be "Start Disc Play".
or simply "PLAY
"
. Highlight that option and press the ENTER button or the PLAY/PAUSE
button.
•
The DVD Player's main menu appears on the screen. Highlight the Play option and
press the ENTER button.
SET DISPLAY
NOTE:
You must set your TV to the Video mode. Please see Page 23.
7
This set has a screen saver which will display a bouncing DVD oval if no video input is played for
a while.
THEATRE
If your DVD HOME
THEATRE
10
HOME
THEATRE
PLAYING DISCS
