8
ASSEMBLY INSTRUCTIONS- continued
2. Attach control panel to shelf unit with 2 screws. Insert nozzle at end of gas valve into cast iron
burner.
3. Turn over the assembly and attach end of black wire that is fixed to a ceramic piece by the
burner to the male attachment clip at top of gas valve on control panel.
4. Attach completed side burner assembly to grill body with 6 screws.
5. Attach wire from rear burner (covered with white insulation) onto the pin on the back side of
the Rear Burner Ignitor.
6. Insert AA battery (not supplied) into Rear Battery Ignitor.
