Service and maintenance
Testo Sensor LD basic V1.01 EN
Seite
4
von
22
3
Service and maintenance
Service and maintenance work must only be carried out by authorized personnel.
4
Environmental protection
•
Disposal of defective batteries / dead batteries according to the valid legal
regulations.
•
After the end of the useful life, take the product to the separate collection
for electrical and electronic equipment (observe local regulations) or return
the product to Testo Sensor GmbH for disposal.
Testo Sensor GmbH
makes no warranty as to its suitability for any particular purpose and
assumes no liability for any errors contained in this manual. Nor for consequential damages
in connection with the delivery, performance or use of this device.
The following accumulator is contained in this electrical appliance
Battery type
Chemical system
Akkumulator
LiIon 2S1P
Information on the safe removal of the batteries or accumulators
•
Warning: Make sure that the battery is completely empty.
•
Removing the battery
Removing the battery cover Disconnecting the connector Carefully pull out the battery
•
Carefully remove the accumulator
•
The accumulator and the appliance can now be disposed of separately
5
Intended use
The Testo Sensor LD basic is a leak detector for quick and reliable leak detection in/on
compressed air systems.
It is solely designed and constructed for the intended use described here and may only be
used for this purpose.
The user must verify that the device is suitable for the intended use. The technical data listed
in this datasheet are binding.
Improper handling or operation outside the technical specifications is not permitted. Claims
of any kind for damages arising from improper use are excluded.
