Operation
Testo Sensor LD basic V1.00 EN
Seite
15
von
22
11.3.3.2
Reset to default settings
Settings
➔
System
➔
Reset to Defaults
11.3.4
Calibration of touchpanel
Settings
➔
calibrate touchscreen
If needed with
„Reboot System“
the Testo
Sensor LD basic could be started(reboot)
here.
Bevor the settings are changed to the
production default settings a safety prompt
is displayed and must be confirmed by
pressing the button
„
Yes
“
.
If necessary, the touch-screen calibration
can be changed here.
Push
Calibrate
and it appears, 1. left
above,2. bottom right, 3. bottom left, 4.right
above and 5. in the middle, a calibration
cross that must be pushed consecutively.
If the calibration finished positive a message
“Calibration successful”
appears and have to
be confirmed with
OK
.
Is this not the case, so you can repeat the
calibration with the help of the
Cancel
and
Calibrate
button.
