7
Using the product
54
Name
Explanation
[OK]
Applies the settings until other data
are called up. The dialogue is closed.
[Cancel]
Closes the dialogue without applying
any changes at all.
Position
Shows a freely-definable extract of the
diagram.
Automatic scaling...
Shows the entire diagram in the
window.
Extract
Shows a firmly defined extract that
can be moved over the time axis.
Limits from…to
(when
Position
view is enabled)
Limits for the
Position
view.
Minimum time cycle
(when
Extract
view is enabled)
Specification of which time period
should at least be shown.
Selection list for the unit
(when
Extract
view is enabled)
Unit of the time axis in the minimum
time cycle:
sec
(second)
min
(minute)
h
(hour)
d
(day).
Absolute
All times are the real times at which
the readings were recorded.
Relative
Sets the starting time to 00:00; the
time then runs relative to this starting
point.
Paging enabled
The function associated with this is
not available in the Small Business
Edition.
Division automat.
Specification that the program should
perform the division of the axis.
Division manual
Specification that the division of the
axis should be performed manually.
Grid [<]
,
[>]
(when automatic division
is enabled)
By clicking on
[<]
or
[>]
, make the axis
division larger or smaller.
Interval
(when manual division is
enabled)
Manual entry of the grid.
Selection list for the unit
(when
manual division is enabled)
Unit of the time axis:
sec
(second)
min
(minute)
h
(hour)
d
(day).
