7 Using the product
49
Showing regression curve
Place a regression curve over the diagram to show the course that the
measurement series tends to take.
1
Click on
Edit
|
Tools
|
Regression curve
.
2
Click on the reading curve for which the regression curve needs to be
shown.
The regression curve is shown and its regression coefficients are
displayed in the status bar.
If you click on the curve again, the regression curve is once more
hidden.
Characteristics of a curve
You can adapt the display of a measurement series to your requirements. So,
you can for example change the line width of a curve or the representation of
the limit values in the diagram.
1
Switch to the diagram view of the measurement series whose
characteristics need to be displayed.
2
In the
Edit
|
Lines
menu, click on the entry of a curve whose
characteristics need to be displayed.
The
Characteristics of (curve name)
dialogue is opened.
The following tabs are available in the dialogue:
•
Edit line
tab
•
Range limits
tab
•
Statistical computation
tab
Buttons of the dialogue
Button
Explanation
[OK]
Applies the changed settings. The
dialogue is closed.
[Cancel]
Closes the dialogue without applying
the changes.
