TESTO 0632 3800, Инструкция по эксплуатации

Страница: 32 / 84

6 Using the product
32
6.2. Conducting a measurement, testo 330-2 LL
V2010 (0632 3307)
6.2.1. Preparing for measurement
The time required for an official measurement is approx. 30 min.
If you switch to wood chips as fuel immediately following a
measurement using wood pellets or split logs as fuel, the
message
Particulate matter sensor and sensor cover
need to cool down (this process may take a few
minutes)
appears. Testo recommends opening the
particulate matter sensor cover prior to selecting wood
chips as fuel, so that the sensor can cool down, see
Cleaning/replacing the sensor module, page 64 . To shorten
the cooling down period, the sensor should be moved to a
cold environment or placed on a cold surface.
Overview of the fuels to be selected (based on VDI 4206 Sheet 2:
2011-06)
Instru
ment
class
Fuel group acc.
to
§ 3 of the 1st
BImSchV
Form of fuel / fuel
type
Fuel to be
selected with
testo 380
A 4
4, 5
5a
Split logs with
attached bark
Wood chips
Pellets or briquettes
in accordance with
DIN 51731 Split logs
Wood chips
Pellets
B 6, 7
8
8
Laminated wood-
based products
(N content > 4.0 %)
Straw and straw
pellets
Cereal grains
Chipboard
Straw
Cereals
C 1, 2, 3
Lignite briquettes
Anthracite
Lignite
Anthracite