14
TT-SX 900x Series High-Voltage Differential Probes User Manual
4 Introduction
4.1
Overview
The Testec TT-SX 900x Series High-Voltage Differential probes allow conventional
earth-grounded oscilloscopes to be used for floating signal measurements - up to
700 V differential or common mode voltage (TT-SX 9001) and up to 1400 V
differential or common mode voltage (TT-SX 9002).
Each model offers user selectable attenuation setting of 10x & 100x (TT-SX 9001)
and 20x & 200x (TT-SX 9002), making both probes highly versatile and usable for
a broad range of applications including power supply measurements and motor
controls.
Both probes are compatible with any oscilloscope with a 1
MΩ BNC female input
and feature up to 30 MHz of bandwidth. The probes can be powered by any
oscilloscope USB port, internal batteries (4 AA batteries, not included in the scope
of delivery), or mains power adapter.
Power Button
Press to turn it on.
Press and hold 5 sec. to turn it off
USB-C Input
Power Port
(on side of probe)
Power and
Overload
Indicator LED
Power Button
Attenuation Selection
Button & LED
Indicators
4mm Sheathed
Banana Plug
Connectors
Insulated BNC Male
Output Connector
Input leads
Output Cable
Note:
Press Power Button
to turn unit on.
Press and hold 5 sec.
to turn it off.
