Tesmec PT2450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 67 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 64 of
89
5.5 MACHINE USE – MECHANICAL CONNECTION BULL-WHEEL
In this configuration, the machine hydraulically connects Circuit 1 to Circuit 2 so that the performance of
the individual circuits can be combined to reach a maximum tensioning force of 100 KN (50 kN + 50 kN).
ATTENZION:
To use the machine in hydraulic connection it is mandatory to insert the
mechanical connection pin into the bull wheel to mechanically connect the two
independent circuits.
To active the hydraulic and mechanical connection and use the machine in this configuration, follow these
steps:
1- To activate the connection, press the dedicated button on the "Machine Work Configuration Selection"
screen (cap.5.5.2.3)
2- The main work screen will be changed automatically and a single maximum force scale of 100 kN will
appear automatically.
It will be visualized two value pressure of the reel winder, in case if necessary use the reel winder circuit 1
or 2.