Tesmec PT2450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 8 of
89
3.4 GENERAL INFORMATION FOR THE MACHINE USE
a. Only employed and qualified operators must use the machine.
Qualified operators is intended to be the person who has received a qualified training from the
using Company or, as alternative, from the manufacturer.
b. Machine must be used only for the work it was designed for.
c. Machine cannot be used with non-authorized personnel on the working site.
d. For safety reasons, during transport machine comes without hydraulic oil and fuel.
Characteristics and required quantities are listed in the present manual.
e. For any doubt concerning use, functioning, maintenance or everything else, contact the After-sales
Service of the manufacturer.
3.5 GENERAL PRESCRIPTIONS FOR THE OPERATOR CHARGED OF THE MACHINE USE
a. Operator
has
to know safety directives for accident prevention in force in the machine using country, for
a correct use of the same.
b. The operator in charge with the installation and maintenance of the machine must use suitable clothes
to the working site and to the situation where he finds himself; in particular, he must avoid the use of
very large clothes, chains, bracelets, rings or whatever can get entangled with moving parts.
c. The operator has to use the necessary protecting devices (i.e. gloves, boots, helmet, etc.).
It is compulsory the use of personal protecting devices for hearing.
d. The operator must not carry out on his own initiative operations or interventions that are not up to him.
e. The operator must carefully follow danger and/or prohibition prescriptions contained in the instruction
manual or indicated on the machine.
f. The working area of the operator has to be cleaned from possible oil or liquids wastes and free of
materials or equipment that may be considered as on obstacle for the operator work.
g. The operator
must absolutely avoid
the direct inhalation of the exhaust gas of the endothermic engine.
3.6 GENERAL PRESCRIPTIONS FOR THE OPERATOR CHARGED OF THE MACHINE
MAINTENANCE
a. It is absolutely forbidden to carry out any work of maintenance, adjustment or setting on units while
stringing (except for the operations indicated in the present manual).
b. Before carrying out any maintenance operations, stop the energy feeding (except for the cases indicated
in the present manual) and wait till the cooling of the elements subjected to heating.
c. All the maintenance operations of the machine must be carried out with machine on a level surface and
not under load.
d. Authorized and trained personnel must do all the maintenance operations, ordinary and not ordinary.
Trained personnel are intended to be the person who has received a qualified training from the using
Company or, as alternative, from the manufacturer.
e. The operator in charge with the machine maintenance must use suitable clothes to the working site and
to the situation where he finds himself; in particular, he must avoid the use of very large clothes, chains,
bracelets, rings or whatever can get entangled with moving parts.
f. The operator has to use the necessary protecting devices (i.e. gloves, boots, helmet, etc.).
g. All the maintenance operations, ordinary and not ordinary, must be effectuated respecting the
prescriptions included in the present manual or following technical indications written by the
manufacturer.
The non-respect of the prescribed restrains relieves the manufacturer from any responsibility causing also
the loss of warranty.