Tesmec PT2450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 47 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 44 of
89
2- Button for machine configuration in mode “c”
This button allows to activate / deactivate the following working configurations of the machine with the
visualization, in the central part of the menu, of the active configuration
Machine with Electronic connection.
Each single circuit can pull or tension until 50KN, but it’s possible
to control both circuit from the control of circuit 2 (see cap.5.11).
The icon of this button is only displayed with disconnected or emergency radio control.
3- Button to active electronic syncronize between “Circuit 1” and “Circuit 2”
The icon of this button is only displayed with disconnected or emergency radio control (see cap. 6.1.3). It
allowed to active or de-active the electronic syncronize between “circuit 1” and “circuit 2” and appear and
disappear the relative icon in case of use.
4- Button about electronic connection of multiple machine.
If the machine is configurate with the optional about the electronic connection between machine (see
Cap 6) it will appear the relative icons.
INFORMATION
To deepen the knowledge and use of the machine in electronic connection
configuration (see chapter 6).