Tesmec PT2450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 80 / 154

HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 77 of
89
6.1.3 ELECTRONIC SYNCRONIZE
The activation of the
electronic synchronism
allows to automatically equalize the speeds of all the circuits
connected to each other with machines in working configuration "PULLER" or "TENSIONER", in order to
have the conductors or ropes at the same height, during operations of stringing.
The electronic synchronize operation can be activated only after the electronic connection of the machines
(see chapter 6.1.1).
When the electronic synchronize operation is activated (by means of the relative switch on the radio control
of the MASTER machine - see chapter 6.1.2), the relative icon will appear in all the "machine functions
menu" of the connected machines:
When electronic connection is active but automatic electronic synchronization (OFF switch sync) is
disabled, manual adjustment can be made on the pull-force value or the recovery speed of the individual
SLAVE machines, depending on the settings set on the MASTER machine.
This system can be used in two different situations
•
Machine in “TENSIONER” configuration:
Between the MASTER machine pull potentiometer, it’s possible to set the pull-force value on all machines,
while through the SLAVE drive remote control potentiometer, it’s possible to make a small adjustment on
the value of the single circuit, depending on the value set on the master.
In this way, the operator can manually adjust the height of the wire or wire according to the line and the
various stretching operations that are being carried out
Syncronize
Icon
active