TI200-PFC
2
1
Safety Review
1.3 – Hazards
WARNING
Shock Hazard Potential
Severe injury or death from electrical shock will occur if either the user or the
TI200-PFC is wet while operating the unit with the 200-260 Vac power source
attached. Be sure to discon nect ac power from the ac source if the TI200-PFC
has come into contact with water. If the AC Input Circuit Breaker has tripped
due to water infiltration, DO NOT try to reset circuit breaker until GPU has dried
completely.
WARNING
Shock Hazard Potential
Severe injury or death from electrical shock can occur when damp electrical plugs are connected to the
TI200-PFC. Make sure the electrical outlet is switched off before making any connections. Failure to use
proper grounding can cause potential shock hazard!
CAUTION
Unit Damage Potential
The unit will be damaged if unapproved ac power is applied. This Unit operates from Single Phase 200-
260 Vac, 40 Hz-450 Hz. This must match ac power source (hangar wall, flight line ac power) prior to
connecting the TI200-PFC.
1.4 – Important Safety Precautions
WARNING
Fire/Explosion Hazard Potential
Severe injury or death from fire or explosion can occur if electrical sparks are produced near fuel vapors.
Power output is 28.5 Vdc. DO NOT CONNECT ac power to GPU while operating or handling any aircraft
fuel.
1.5 – Extreme Environments
CAUTION
Unit Damage Potential
The TI200-PFC is equipped with a charger temperature switch that automatically disables ac and charging
functions when the internal temperature reaches above 150°F (65°C). This protects the unit from
overheating and damage. If the unit shuts down, move the unit into a cooler climate such as shade or
air conditioning when possible. Perform a full function test prior to use after the unit has been allowed
to cool.
