TI200-PFC
14
3
Operating Procedures
3.7 – Regulated 28.5 Vdc Ground Power
Connecting DC Power Cable To Unit
Attaching a dc plug is quick and easy. Line up the plug with the receptacle. Push forward while rotating the
T-handle one full turn clockwise. Ensure dc power cable plug is fully seated into the GPU’s dc receptacle. The
unit is now ready to safely transfer power.
Connecting DC Power Cable To Vehicle or Aircraft
Line up the NATO plug or aviation dc plug pins and push it in. DC bus power should come on and aircraft
voltmeter should indicate 24 Vdc to 23.5 Vdc (23 Vdc minimum). Ensure dc power cable plug is fully seated
into the vehicle or aircraft’s dc receptacle
Figure 3.7.2 Attaching DC Power Cable to ground vehicle
Figure 3.7.1 Attaching DC Power Cable to TI200-PFC
Figure 3.7.3 Attaching DC Power Cable to aircraft
NOTE
!
Unit is not rated for engine starting. It is to be used for ground
maintenance only.
