TI200-PFC
19
5
Unit Care and Maintenance
Check DC Voltage Reading at DC Receptacle Terminals
2.
Testing dc receptacle, reading should be ap-
proximately 28.5.
3.
Move the positive probe to the dc positive post.
Reading should be 0.
4.
Move the positive probe to the dc negative
post. Reading should be 0.
1.
Plug unit into ac power and turn on AC Input
Breaker (see Section 3.7 and 3.9). One green
LED should illuminate. Set multimeter to Vdc.
Figure 5.3.1 – Warranty Void stickers Front and Back on the TI200-PFC
5.3 – Unit Servicing
The TI200-PFC is a maintenance-free, sealed unit. No repairs outside of Tesla™ are authorized. Warranty will
be voided if unit is tampered with in any way including any damage to the WARRANTY VOID stickers located
on the case (see Figure 5.3.1 below). If the unit requires maintenance, please contact Tesla™ Customer
Service at (302) 324-8910. A Repair Request Form can be found in the back of this manual.
