Tesla MODEL X 2021, Руководство пользователя

Страница: 47 / 318

NOTE: To accommodate large rear-facing
LATCH child safety seats, you may need to
move the seat in the full rearward position,
and move the corresponding front seat
forward to the mid-track position (up to 13
cm forward of the rearmost position), raise
the seat upward (3 cm from its lowest
position), and angle the seat back to 15
degrees (or 10 degrees rearward from its
forward-most position).
WARNING: For vehicles with third row
seats, when a child is seated in a
second row monopost seat, the
setting for the button that moves a
second row outboard seat forward for
easy access into the third row should
be OFF (touch
Controls > Safety >
Third Row Easy Entry ). This ensures
that you need to manually hold the
button to move the seat, preventing a
child seated in the second row from
being pushed against the
corresponding front seat. See
Adjusting Second Row Seats
(Monopost) on page 34
.
To install a LATCH child safety seat, slide the
safety seat latches onto the anchor bars until
they click into place. Carefully read and follow
the instructions provided by the child safety
seat manufacturer.
Bench Seats
Monopost Seats
Once installed, test the security of the
installation before seating a child. Attempt to
twist the child safety seat from side to side
and try to pull it away from the seat, then
check to ensure the anchors remain securely
in place.
NOTE: Lower LATCH anchors should not be
used with child seats or booster seats that
have an integrated safety belt in situations
where the combined weight of the child plus
the child safety seat is more than 65 lbs (29.5
kg). In these situations, use the seat belt
instead.
Child Safety Seats
45 Seating and Safety Restraints