TESI XE18PB06, Инструкция по эксплуатации и техническому обслуживанию

Страница: 41 / 66

40
PORTABLE HIGH-ENERGY IGNITER
– XE18PB06 - Rev.00
5.1 GENERAL
WARNING
Most accidents are attributable to non-compliance of the most basic safety rules. It is
necessary for anyone working on the ignition device perfectly know and abide by the
rules in this publication
5.2 REMOVAL OF PROTECTIVE PACKING AND GETTINGS STARTED
The procedure for removing any packaging from the portable igniter, it is quite simple but very important in
order to avoid problems, so depending on the type of packaging used should be followed in the following:
1. remove polythene bubble from the ignition device;
2. open the wooden box and remove the fasteners that secure the ignition device (optional only on the
packaging).
NOTE
In the presence of special packaging, you must keep it throughout the lifetime of the
ignition device to reuse later in the case handling
5.3 INSTALLATION OF IGNITION DEVICE
5.3.1. CONNECTING THE BATTERY
Before first use of the ignition device, connect the battery as follows:
1 Open the housing cover (front part).
2 Connect the cable to the battery terminals, then close the cover.