TESI XE18PB06, Инструкция по эксплуатации и техническому обслуживанию

Страница: 21 / 66

20
PORTABLE HIGH-ENERGY IGNITER
– XE18PB06 - Rev.00
2.1 FOREWORD
The portable high-energy igniter XE18PB06, this manual refers to, allows the generation of a spark with a high
energy potential.
The portable high-energy igniter XE18PB06 is used in various processes, but its purpose is to start up the
combustion in a industrial burner.
The high energy igniter, as just mentioned, is able to supply powerful sparks from the end of the ignition lance
so that any kind of fuel can be ignited, even liquid or heavy fuel oils.
2.1.1. USE DESTINATION
The portable high-energy igniter XE18PB06 is meant for an industrial use.
2.1.2. OPERATOR
No particular technical knowledge is required for using the portable high-energy igniter XE18PB06. A careful
reading of this manual will be sufficient; anyway, it is here reminded that both the experience and a good
knowledge of the product represent a quite important factor.
2.1.3. WORK ENVIRONMENT
PROHIBITION
Both positioning and using the portable high-energy igniter XE18PB06 in potentially
explosive environments are forbidden.
The portable high-energy igniter XE18PB06 can operate in any work environment in the yard activity field,
exception made for those explosive environments, in which an explosion-proof protection is required.
2.1.4. ENVIRONMENTAL REQUIREMENTS
The portable high-energy igniter XE18PB06 must be used by presence of the following environmental
conditions:

Maximum temperature ............................................................................................................ + 50 °C (122 °F)

Maximum charging temperature ............................................................................................. + 40 °C (104 °F)

Minimum temperature ................................................................................................................. - 20 °C (-4 °F)

Minimum charging temperature ..................................................................................................... 0 °C (32 °F)

Relativity humidity ...................................................................................................................................... 85%
2.1.5. NOISE EMISSION
The noise level measured in the normal use conditions described in the use manual, is either equal to or lower
than 85 dB (A).
The indicated level is that of pondered instantaneous acoustic pressure during the Portable High Energy Igniters
using peaks. The daily or weekly exposure of the workers must be anyway determined in the real use conditions
and generally results to be lower than the previously indicated value.
Anyway, the use of ear protection-guards is recommended.