TESI XE18PB06, Инструкция по эксплуатации и техническому обслуживанию

Страница: 23 / 66

22
PORTABLE HIGH-ENERGY IGNITER
– XE18PB06 - Rev.00
2.2.1. PORTABLE HIGH ENERGY IGNITIER
All the components of the portable high-energy igniter XE18PB06 are installed inside an aluminum box with a
protection degree IP65 whose dimensions are: 344 x 280 x 110
The total weight is about 5.7 kg.
The following components are installed inside the box:
1 Electronic board
2 Rechargeable battery
3 Capacitor
The front cover of the aluminum box is secured in position by 4 screws.
On the right side are installed: the power connector for the main connection cable and a plug screwed on a
ventilation hole. The plug has to be removed while charging the battery.
On the left side is installed a round connector for the charge cable used for the battery recharge process.
On the top side together with the lifting handle the following devices are installed:
1. A green light which indicates the presence of voltage during charging.
2. A multicolor LED indicator lights which is providing information while the high energy igniter is used
(Ignition button pressed). The color of this indicator change according to the battery charge level as
follow: GREEN (fully charged), ORANGE (low battery 21-50%), RED (battery below 20%, to be
charged)
3. A red button which is used to activate the high energy igniter and provide energy to the ignition lance.
1
2
1
2
3
3