CBA 400M-260 OPERATING MANUAL
8
REAR PANEL
MAINS POWER SWITCH
This switch isolates all power from the amplifier, when switched on, the amplifier will power up in
standby mode.
INTERLOCK
Two BNC connectors are provided labelled INTERLOCK and INTERLOCK. In order for the
amplifier to be in operating mode INTERLOCK must be short Circuit and INTERLOCK must be
open Circuit. A short circuit BNC is supplied with the amplifier fitted to the INTERLOCK connector
therefore the amplifier will be in a normal operation condition as delivered.
INPUT/OUTPUT CONNECTORS (depending on model)
The RF input and output connectors may optionally be placed on the rear panel if selected at the
time of ordering.
FAN OUTLET
The amplifier depends upon a free air supply for cooling. Ensure that the fan outlets are not
restricted.
MAINS INPUT
The mains input is an IEC 60320 type. The cable attached to the mains input must be rated at 16A
to ensure proper operation at the minimum line voltage of 85V ac. The fuse-holder is integral with
this mains connector. Use fuse type T 15A H 250V.
INPUT/OUTPUT CONNECTORS (depending on model)
The RF input and output connectors may optionally be placed on the rear panel.
