CBA 400M-260 OPERATING MANUAL
4
SAFETY INFORMATION
This apparatus has been designed and tested in accordance with BS EN 61010-1, and has been
supplied in a safe condition. This manual contains some information warnings which must be
followed to ensure safe operation, and to retain the apparatus in a safe condition.
This apparatus does not incorporate components liable to explode or implode during normal
operating conditions.
In normal operating conditions this apparatus does not liberate injurious or poisonous gases.
Sound levels of this apparatus after installation in a rack are below 85dBA, as required by
EN61010-1. However local regulations may have a lower limit or the system as a whole may exceed
the local limit. In this case appropriate action should be taken, i.e. of use of any protective
equipment required by local regulations.
This apparatus is of Installation Category 2.
WARNING
This apparatus is capable of delivering harmful levels of radio frequency power.
Ensure at all times during operation that the RF output is properly terminated with
an adequately rated termination or transducer, and that the cables and connectors
attached to the apparatus are in good condition.
The mains plug shall only be inserted in a socket outlet provided with a protective
earth contact. The protective action must not be negated by the use of an
extension cord without a protective conductor.
The opening of covers or removal of parts is likely to expose live parts.
This apparatus must be disconnected from all voltage sources before it is opened
for adjustment, replacement, maintenance or repair.
Make sure that only fuses of the required rated current and of the specified type are
used for replacement. The use of makeshift fuses and the short-circuiting of fuse
holders is prohibited.
