CBA 400M-260 OPERATING MANUAL
9
SECTION 4
SPECIFICATION
The following specification applies over the operational temperature and frequency range unless
otherwise stated, and does not include the characteristics of connecting cables.
Frequency Range (instantaneous)
10kHz-400MHz
Rated Output Power
260W minimum
Output Power at 1dB Gain Compression
210W minimum
Gain
54dB
Third Order Intercept Point
64dBm
Gain Variation with Frequency
±3dB
Harmonics at 100W Output Power
Better than -20dBc
Output Impedance
50 Ohms
Stability
Unconditional
Output VSWR Tolerance
Infinity:1
Input VSWR
2:1
RF Connector Style
Type N female
Safety Interlock
BNC female
USB Interface
Optional
EMC and Safety
Conducted and Radiated Emissions
EN61326 Class A
Conducted and radiated immunity
EN61326: 1997 Table 1
Mains harmonic currents
EN61000-3-2
Voltage fluctuations and flicker
EN61000-3-3
Safety
EN61010-1
Power
Supply Voltage (single Phase)
100-240V ac (+/-10%)
Supply Frequency Range
47-63 Hz
Supply Power
<2 kVA
Mains Connector
IEC320
Environmental
Operating Temperature Range
0-40°C
Mechanical
Case Dimensions
19 inch, 6U case, 550mm deep
Weight 30 kg
Options
(selected at time of ordering)
341-832
Rack mountable with front panel mounted input/output connectors
341-932
Rack mountable with rear panel mounted input/output connectors
Notes
1 The third order intercept point is a nominal value, as its calculation depends upon the power level at which distortion
measurements are made.
2 Output VSWR tolerance is specified for excitation within the permitted levels and frequency range.
