EN
4
Features and controls
General overview
Door handle
Door interlocks
Turntable
Control panel
Grill rack (only for
grilling. Place on
turntable)
Turntable
support ring
Turntable rotor
Viewing
window
Oven door
Assembly and Placement
Place your microwave oven on a flat, level stable work surface away
from sources of cold, heat and damp. The minimum installation
height is 85cm.
For good ventilation,
the rear and the left side
should have a clearance
of at least 7.5 cm from the
wall, the right side should
be open and the free
distance above the top
should be at least 30cm.
Installing the Oven
Always operate your microwave oven with the turntable assembly
properly installed.
Open the door. Ensure the turntable rotor is securely located on the
spindle beneath. There is a flat machined on the spindle to hold the
rotor securely during operation.
Place the support ring in the recess.
Place the turntable on the support ring with the smooth side
uppermost. Locate the turntable on the rotor and check that it is
central to and properly supported by the ring. Refer to the drawing
below.
Close the door.
Connecting Power
Unwrap the power cord fully. Plug the oven directly into the wall
socket.
Ensure that the oven Timer Control is set to ‘0’ (OFF)
Plug the mains plug into the power socket. Switch on at the mains
The oven is now ready for use.
7.5cm
30cm
OPEN
7.5cm
85cm
This oven is not suitable
for operation in a cabinet
or other enclosure.
