13
5.2.7 Reset Button and Transmitter LED
In the event that the sensor array is not transmitting, reset the sensor
array.
With an open-ended paperclip, press and hold the
RESET BUTTON
for three seconds to completely discharge the voltage.
Take out the batteries and wait one minute, while covering the solar
panel to drain the voltage.
Put batteries back in and resynchronize with colour console by
powering down and up the console with the sensor array about 3 meter
away.
Figure 11
5.3 Best Practices for Wireless Communication
Note:
To ensure proper communication, mount the remote
sensor(s) upright on a vertical surface, such as a wall.
Do not lay the
sensor flat.
