![background image](http://html.mh-extra.com/html/tesa/clinobevel-2/clinobevel-2_instruction-manual_1090540022.webp)
ENTER
ENTER
ZERO/SELECT
ZERO/SELECT
22
Select
desired unit,
e.g. « mm/REL »
Display shows the
« relative base length »
stored in the memory
Select
and confirm
« Relative base length »
CLINOBEVEL 2 is ready to
measure with new « Relative
base length »
7.3 Setting the filtre to attenuate the signal during the measurement operations
The ambient conditions may badly affect the
quality of your display. In order to avoid
this happening, the measurement signal can be
attenuated as the values are being captured.
Activating the « Filtre » will help reducing the
vibrations or the swinging effects whenever the
resting surface is unsteady.
Your TESA CLINOBEVEL 2 allows you to set the
filtre in steps from 1 to 10. The weaker the filter
(small number) the less the signal is attenuated.
– Step 1 = the signal is captured with no lesse-
ning effect and maximum sensitivity.
– Step 10 = display of the mean value obtained
from several successive values captured is
somewhat delayed.
Filter 5 has been set by the factory. Should you
wish to alter the factory setting 5, follow the
procedure starting hereafter. We would recom-
mend to make your own setting according to
given ambient conditions.
Содержание CLINOBEVEL 2
