User Manual for Tersus GeoBee30 v1.0
46
If GeoBee30 is configured to work under Ntrip client mode, fill in the Ntrip
information under the [NTRIP CFG] sub menu of TR600 configuration page.
Select [client] in the drop-down menu of Ntrip Type, type in the Ntrip Username
and Ntrip password, and click [Save] at the bottom of this page to complete the
configuration.
The Ntrip information can be found on Ntrip Modem TR600. If there is any
question,
please
contact
Tersus
Technical
Support
by
without any hesitate.
Figure 4.2 GeoBee30 under Ntrip client mode