User Manual for Tersus GeoBee30 v1.0
23
2. General Operation
This chapter introduces how to use GeoBee30, configuration parameters,
factory reset and firmware upgrade.
2.1 Configurations
2.1.1 Accessories Required
The accessories required are listed below:
1) One Power Adapter (DC-5pin AC Power Adapter with 1.2m cable);
2) One COMM1 cable (COMM1-7pin to DB9 male cable);
3) One DB9 Female to USB Type A Male Converter cable;
4) One COMM1-Bluetooth module;
5) One Ethernet cable for connecting TR600 and PC or customized device.
2.1.2 Configure David30
Configuring David30 is able to be done using Tersus GNSS Center via cables
or using Nuwa app via Bluetooth.
2.1.2.1 Configuring David30 using Tersus GNSS Center
The detailed steps of configuring David30 using Tersus GNSS Center via
cables are listed below:
1) Use the ‘DB9 Female to USB Type A Male Converter cable’ to connect the
COMM1 cable (COMM1-7pin to DB9 male cable) and a computer;
2) Open Tersus GNSS Center application on the computer and type below
commands in the command window:
