User Manual for Tersus GeoBee30 v1.0
13
LOG COM2 RTCM1046 ONTIME 5
//Galileo ephemerides
SAVECONFIG
//save configuration
Note2
: If customer needs to use global geoidal height model EGM96 for mean sea
level height, type below command to replace the undulation command above.
UNDULATION EGM96
//Set EGM96 geoidal height model
More details about logs and commands refer to
BX40C log & Command
document
.
Power cycle the receiver or input RESET command to make the above configuration
effective.
6) The known phase center coordinates of the AX4E02 antenna can be obtained from
surveying and mapping department of local government, or calculated from commercial
software such as Bernese or Gamit.
7) If customer needs GeoBee30 work with local CORS system, calculate the accurate
coordinate of the base station under the local CORS framework and configure the base
station with this accurate coordinate. The calculation to obtain this accurate coordinate can
be PPP method and coordinate conversion via point correction using Nuwa app. You can
contact Tersus technical support for detailed method.
