TerraView RangePro RPX8-P, Руководство пользователя

Страница: 14 / 139

Audience 14
About this Guide
This guide describes unpacking and readying for flight the TerraView RangePro® RPX8-P multi-rotor
unmanned aircraft system (UAS).
Audience
This guide is intended for operators and technicians who have experience in operating and/or servicing drone
aircraft.
Structure
This guide contains the following chapters and appendices:
•
Chapter 1 , starting on page 17, contains an overview describing the RangePro RPX8-P UAS
•
Chapter 2 , starting on page 20, covers the contents of the UAS box
•
Chapter 3 , starting on page 24, explains how to register and label the UAV
•
Chapter 4 , starting on page 26, contains warnings, cautions, and notes about the UAS
•
Chapter 5 , starting on page 29, describes how to assemble the UAV
•
Chapter 6 , starting on page 52, describes how to set up ground control
•
Chapter 7 , starting on page 62, provides instructions on what to do in case of an emergency
•
Chapter 8 , starting on page 66, describes the phases of flight operations
•
Chapter 9 , starting on page 80, gives information on data management
•
Chapter 10 , starting on page 83, explains drone battery management
•
Chapter 11 , starting on page 87, provides maintenance procedures
•
Chapter 12 , starting on page 90, explains how to contact TerraView for support
•
Appendix A , starting on page 92, provides compliance info for the UAS
•
Appendix B , starting on page 94, is the RangePro RPX8-P warranty
•
Appendix C , starting on page 97, is a manual flight checklist
•
Appendix D , starting on page 100, is an automated flight checklist
•
Appendix E , starting on page 102, is a post-flight checklist
•
Appendix F , starting on page 104, lists LED meanings
•
Appendix G , starting on page 106, provide details on login credentials, preferred and/or required settings,
and details on how different systems work together
• Appendix H , starting on page 110, covers the standard ground control station channel layout
• Appendix I , starting on page 114, provides the Herelink controller settings
• Appendix J , starting on page 117, provides helpful parameter hints
• Appendix K , starting on page 119, explains how to load specific parameters
• Appendix L , starting on page 121, covers making sense of motor tests
• Appendix M , starting on page 123, covers serial port allocation
• Appendix N , starting on page 125, describes breakout board connections and pinouts
• Appendix O , starting on page 130, gives information on shipping lithium polymer batteries