3 MIDI control
The SINE WARP 9 sends and receives the following MIDI data:
n
n
n
n
Program Changes (1-32, reception only on the active receive channel)
Midi Clock (for LFO reset)
Note On/Off (for ENV/VCA triggers, reception only on the active receive channel)
Control Changes (sending and reception only on the active receive channel)
If a parameter is modified by changing one of the controls, the SINE WARP 9 will send an
appropriate control-change message to the MIDI OUT which can then be recorded by a
MIDI sequencer. If these controller messages are sent back to the SINE WARP 9, the
parameter will be set according to the value. The following table provides an overview of
the parameters and the associated controller messages sent and received via MIDI.
Parameter Controller
number Controller
values
ENV mode
103
0 – 127
Cutoff
104
0 – 127
Resonance
105
0 – 127
Attack
106
0 – 127
Decay
107
0 – 127
Sustain
108
0 – 127
Release
109
0 – 127
Delay
110
0 – 127
LFO rate
111
0 – 127
LFO depth
112
0 – 127
Controller value 0 corresponds to the control knob in the minimum position.
Controller value 127 corresponds to the control knob in the maximum position.
n
Controller Changes (reception only on the active receive channel)
Parameter Controller
number Controller
values
VCA control
113
0 – 127
LFO reset:
104
0 – 127
Filter mode
105
0 – 127
Modulation wheel
106
0 – 127
30
SINE WARP 9 (English)
