n
n
n
n
Controlling filters via MIDI:
Connect a sequencer to the MIDI OUTPUT, start the sequencer in recording mode
and adjust the Cutoff control, for example. The SINE WARP 9 will send controller data
(channel 1) that will be recorded by the sequencer. When the sequencer sends the
recorded controller data back to the WARP 9, the cutoff frequency will change to
match the controller adjustment during recording.
Saving:
To save the current settings, press the Write button. Press the Program button to
select the program number under which you would like to save the settings. Each
program number is indicated by a different state of the LP, HP, BP and N LEDs. Press
the write button again to save the program. To cancel: press the Channel button, for
example.
Other functions:
In principle, you are now acquainted with the essential functions of the SINE WARP 9.
Unusual modulations can be achieved with a variety of envelope mode settings (ENV
Mode control), LFO waveforms (LFO Wave control, Select on 1) and LFO resets (LFO
Reset control, Select on 1).
For more information, read the manual thoroughly.
10
SINE WARP 9 (English)
