Safety information
Please ensure that analog devices are turned off before plugging
them in. This will protect you from any possible – albeit weak –
electrical shocks, as well as protecting your speakers and your
hearing from sudden peaks.
QuickStart guide
for those of you who can't wait:
To configure the many settings of the AXON AX 50 USB, please install the editor soft-
ware on your computer and connect the AXON AX 50 USB to your computer using the
included USB cable. A separate driver installation is not required.
If you would like to use the included WAVE XTABLE VI contact player with its 128
sounds for audio output, please install it from the included DVD.
If you are using an external MIDI instrument for audio output, connect the MIDI OUT of
the AXON to the MIDI IN of the instrument.
Connect your guitar to the AXON AX 50 USB. Your guitar must be equipped with one
of the included hexaphonic pickups such as the AXON PU 100 or 103, or a piezo pi-
ckup such as those offered by GraphTech, RMC or other vendors. Please use the 13-
pin AXK 100 cable. The socket at the left of the front panel labelled "INPUT" is the one
you need. Ensure that the plug clicks into place in the socket for optimal contact.
Finished! The AXON has been preconfigured at the factory to let you get started with a
minimum of hassle.
We nevertheless recommend that you take the time to set up the AXON to suit your
playing style and your instrument. It's essential if you want to fully leverage the
AXON's strengths and experience the best possible tracking.
AXON AX 50 USB v2.0 (English)
7
