Installation in Windows XP
Driver installation
1. Connect the AXON AX 50 USB to a free USB port (1.1 or 2.0) on your computer and
switch the AXON on.
2. A short time later, a pop-up window will appear to indicate that a new device – the AX
50 USB – was found. The Windows installer will complete the installation automati-
cally. The device uses generic drivers already present in your system, making it un-
necessary to enter a path to a custom driver. After a few seconds, another pop-up will
inform you that the new hardware has been installed and is ready to use.
3. There, you're finished already!
Editor installation
1. Insert the included AXON CD in your drive and wait for the autorun application to
launch. If the autorun application on the CD does not launch automatically, start the
application manually by double-clicking "Autorun.exe" in the root folder of the CD.
2. Select your language and "AXON Editor" in the following menu. The setup wizard will
now appear.
3. The wizard will now display its welcome message.
4. In the following menu, select the path and destination folder.
5. Click "Finish" to complete the installation.
6. Launch the application with Start \ Programs \ TerraTec \ AXON AX 50 USB \ AX 50
USB Editor.
Installation in MAC OS X
Driver installation
1. Connect the AXON AX 50 USB to a free USB port (1.1 or 2.0) on your computer and
switch the AXON on.
2. The device uses generic drivers already present in your system, making it unneces-
sary to enter a path to a custom driver.
3. There, you're finished already!
10
AXON AX 50 USB v2.0 (English)