Section II. Specifications
System Ratings and Operating Parameters
System Rating
U.S.
Production
0.5 G.P.M.— 0.75 G.P.M.
Capacity
1100 Gallons AMB-9S
1000 Gallons FD-MultiMedia
2000 Gallons Teros-UF Membrane
Recommended Operating Limits for Feed Water
Water Pressure
20—125 psi
Total Dissolved Solids
Less than 500 ppm or 500 mg/l
Temperature 35—
110
°
F
2— 43
°
C
pH
6.5 to 8.5 recommended
Iron
Less than 0.5 ppm 0r 0.5 mg/l
Manganese
Less than 0.05 ppm Or 0.05 mg/l
Hydrogen Sulfide
Less than 0.3 ppm Or 0.3 mg/l
Chlorine
0— 10 ppm
Section III. Preparation
A. System Components
The following components comprise the Teros Systems.
Housing Top Assembly
2 Housing sumps with O-rings
Lead-Free drinking water faucet
EZ-Adapter valve
Plastic tubing and connectors
AMB-9S AquaMetix block candle
Teros UF Membrane
*FD-MultiMedia— Only on 3S model.
B. Tools Recommended for Installation
The following tools will cover most of the installation
sites encountered.
1. 3/8” variable speed drill
2. Extension work light
3. Safety
glasses
4. 7/16” carbide drill bit
5. 1/8” metal drill bit for pilot hole.
6. Center punch and hammer
7. Phillips head and flat blade screwdrivers
8. Tubing
cutter
9. Paper towels, broom and assorted clean up ma-
terials
C. Site Selection
The Teros system was designed to fit under a sink,
however, because of space limitations or other reasons,
the system’s flexible design allows for other locations.
When determining the location remember that access to
a cold water tap line and ease of filter replacement are
important considerations.
All components and tubing should be located in an area
which is not exposed to freezing temperatures. If
winter temperatures are sever, the area should be
