manualshive.com logo in svg

Terex HI-RANGER TM Series, Руководство оператора

Поделиться
Скачать
Terex HI-RANGER TM Series Скачать руководство пользователя страница 9

TM SERIES

-III

T M   S e r i e s

T e r e x   S o u t h   D a k o t a ,   I n c .

  4 7 2 7 9 7   -   1 / 1 5

SAFE

TY

SAFETY

The operator is the single most important factor for safety when using any piece of equipment. Learn to 
operate your Terex South Dakota, Inc. equipment in a safe manner.

NOTE: The best method to protect yourself and others from injury or death is to use common 

sense. If you are unsure of any operation, do not continue until you are satisfied that it is 
safe to proceed.

HAZARD CLASSIFICATION SYSTEM 

This machine contains safety signs to assist in hazard recognition and prevention. The hazard 
classification system is a multi-tier system used to alert you to potential personal injury hazards. Signal 
words used with the safety alert symbol indicate a specific level of severity of the potential hazard. To 
help you recognize important safety information, we have identified 

warnings

 and 

instructions

 that 

directly impact safety.

PROPERTY DAMAGE MESSAGES

The signal word NOTICE, shown without the safety alert symbol, is used to address specific practices or 
draw attention to supplemental information that is not related to personal injury.

This is the safety alert symbol. It is used in this manual to alert you to potential 
personal injury hazards. Obey all safety messages that follow this symbol to avoid 
possible injury or death.

Danger

 is always used with the safety alert symbol and white letter on red background.

Indicates a hazardous situation that, if not avoided, will result 
in death or serious injury.

Warning

 is always used with the safety alert symbol and black letters on orange background.

Indicates a hazardous situation that, if not avoided, could 
result in death or serious injury.

Caution 

is used with the safety alert symbol and black letters on yellow background.

Indicates a hazardous situation that, if not avoided, could 
result in minor or moderate injury.

Notice

 does not use the safety alert symbol and text is white italic letters on blue background.

Indicates information considered important, but not hazard 
related (e.g., messages related to property damage).

DANGER

WARNING

CAUTION

NOTICE

Содержание HI-RANGER TM Series





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды