Terex HI-RANGER TM Series, Руководство оператора

Страница: 111 / 116

APPENDIX B
A p p e n d i x B T e r e x S o u t h D a k o t a , I n c .
B- 7
APPENDIX
-
B
10.4 Work Platform. The operator shall not use railing, planks, ladders or any other device in or on the work
platform for achieving additional working height or reach.
10.5 Brakes . The vehicle parking brake(s) shall be set at all times that the boom is elevated except when
the aerial device is being used in accordance with 10.11.
10.6 Loading. Any loading which includes a horizontal load shall be avoided unless the mobile unit is
designed for the application.
10.7 Alterations. Altering or disabling the function of safety devices, guards, or interlocks if so equipped
shall be prohibited.
10.8 Observations. Observations during operation for any malfunctions shall be conducted on an ongoing
basis.
10.8.1 Pre-start Inspection. Items determined by the owner in accordance with the manufacturer’s
recommendations for each specific aerial device shall be inspected prior to each day’s operation. The
following tests and inspections shall be performed by the operator once daily, prior to first use:
(1) Conduct walk around visual inspection, looking for damaged components, cracks or corrosion, excessive
wear and any loose, deformed or missing bolts, pins, fasteners, locking devices and covers.
(2) Check all controls and associated mechanisms for proper operation to include, but not limited to, the
following:
(a) Proper operation of interlocks.
(b) Controls return to neutral when released and not sticking.
(c) Control functions and operation clearly marked.
(3) Check visual and audible safety devices for proper operation.
(4) Visually inspect fiberglass and other insulating components for visible damage and contamination.
(5) Check for missing or illegible operational and instructional markings.
(6) Check hydraulic or pneumatic systems for observable deterioration and excessive leakage.
(7) Check electrical systems related to the aerial device for malfunction, signs of excessive deterioration, dirt
and moisture accumulation.
(8) Perform functional test to include, but not limited, to the following:
(a) Set-up aerial device for operation, including outriggers.
(b) Cycle each aerial device boom function through its complete range of motion from the lower controls,
except where operation through the complete range of motion would create a hazard.
(c) Check functionality of emergency controls.
Any suspected items shall be carefully examined or tested and a determination made by a qualified person
as to whether they constitute a safety hazard. All unsafe items shall be replaced or repaired before use.
10.9 Worksite. Before the aerial device is used the worksite shall be surveyed for hazards such as:
(1) Insufficient supporting surfaces such as soft ground or tamped earth fills.
(2) Ditches.
(3) Excessive slopes, drop-offs, curbs, and floor obstructions.
(4) Debris.
(5) Overhead obstructions and electrical conductors.
(6) Weather conditions.
(7) Presence of unauthorized persons.
(8) Road or worksite traffic.
(9) Subsurface chambers such as underground utility components or septic systems.