Terex HI-RANGER TM Series, Руководство оператора

Страница: 49 / 116

TM SERIES
1-13
T M S e r i e s T e r e x S o u t h D a k o t a , I n c . 4 7 2 7 9 7 - 1 / 1 5
OPERA
T
ION
GUIDEL
INES
LOWER CONTROLS
NOTE: Lower boom, upper boom, and rotation sequence may vary. Refer to decal on Aerial
Device.
ITEM CONTROL DESCRIPTION
1. Top Control and Option
Shut-Off Controls oil flow to the option valve and hydraulic tool at the platform. In
the “OFF” position no oil is available at the platform valve. Must be in
the “ON” position to operate the jib, winch, platform rotate and hydraulic
tools at the platform location.
2. Lower Boom Controls lower boom articulation, upper maintains same angle to truck.
3. Boom Rotation Controls rotation of booms.
4. Upper Boom Controls articulation of upper boom.
5. Platform Level Allows the platform to be hydraulically tilted to level the platform.
Utilized for emergency removal and platform clean out.
6. Winch Used for operating the winch during material handling operations.
7. Lower Boom Extend Used to extend the lower boom.
8. Upper Boom Extend Used to extend the upper boom.
9. Engine Stop/Start (Optional) Controls stop and start of the engine from the pedestal.
10. Two-Speed Throttle
(Optional) Two-speed throttle provides two engine speeds, low and high, with
engine running. Low speed is engine idle.
11. Manual Let Down Power Used to manually use boom functions in the event of a prime power
source failure.
12. Enable Press and hold to operate lower controls.
The decals are an integral part of this vehicle. If the decals are illegible, they must
be replaced.
Always operate controls slowly and deliberately for smooth movements. Rough
handling is never excusable and may cause damage to the Aerial Device and
endanger the operator.
Use the Top Control and Option Shut Off to override upper boom controls with the
lower controls if needed. It will stop all oil flow to the boom tip.
10
9
12
1
11
6,7,4,3,2,8,5