Terex HI-RANGER TM Series, Руководство оператора

Страница: 57 / 116

TM SERIES
1-21
T M S e r i e s T e r e x S o u t h D a k o t a , I n c . 4 7 2 7 9 7 - 1 / 1 5
OPERA
T
ION
GUIDEL
INES
PLATFORM TILT
The platform leveling system permits the platform to be tilted to clean out water and debris. It also allows the
platform to be tilted for personnel rescue. The control is located at the upper controls and lower controls.
The platform can be tilted with the lower boom raised fully and the upper boom folded to get close to the
ground (operate from lower controls only).
When using the tilt function do not get in the platform. Operate from the upper controls only while standing
on the ground alongside the platform or from the lower controls.
Tilting Operation:
1. Rotate the platform to the end mount position.
2. Use the lower controls to position lower boom up and upper boom so platform is near the ground.
3. Check for obstructions or people before moving the platform.
4. Move the leveling control to dump the platform while standing alongside the platform.
5. Return the platform to level position before moving the booms.
NOTE: Return the platform to level before moving the booms.
To operate from the upper controls or override leveling squeeze enable lever and move lever side to side to
activate (DO NOT lift control lever).
Do not allow anyone to operate the platform tilt device while occupants are in the
platform. Serious personal injury or death could result from platform upsetting.
Slide lever side to side only, attempting to lift lever will damage valve and cause
malfunction.