Terex Genie Z-60 DC, Руководство по обслуживанию

Страница: 14 / 193

Service and Repair Manual August 2022
Specifications
2 Z ® -60 DC • Z ® -60 FE Part No. 1307785GT
Performance Specifications
Drive speed, maximum
Stowed position
2WD/4WD models Stowed
4.0 mph
6.44 km/h
40 ft / 6.8 sec
12.2 m / 6.8 sec
Elevated 0.7 mph
1.0 km/h
40 ft / 40 sec
12.2 m / 40 sec
Gradeability See Operator's Manual
Braking distance,
high range on paved surface
3 to 6 feet
0.9 to 1.8 m
Function speeds, maximum from platform controls
Jib boom up 13 to 17 seconds
Jib boom down 13 to 17 seconds
Primary boom up 54 to 66 seconds
Primary boom down
54 to 66 seconds
Primary boom extend 40 to 50 seconds
Primary boom retract 31 to 39 seconds
Secondary boom up
31 to 39 seconds
Secondary boom up/down 31 to 39 seconds
Turntable rotate, per 90°
Stowed
21 to 27 seconds
Turntable rotate, per 90°
Not stowed
35 to 42 seconds
For operational specifications, refer to the
Operator's Manual.
Hydraulic Oil Specifications
Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
conditioning, and foam and aeration suppression
properties.
Cleanliness level,
minimum
ISO 15/13
Water content,
maximum
250 ppm
Recommended Hydraulic Fluid
Hydraulic oil type
Chevron Rando HD Premium
ISO Grade 32
Viscosity index,
maximum
200
Optional Hydraulic Fluids
Mineral based
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32
Shell Donax TG (Dexron III)
Chevron 5606A
Biodegradable Petro Canada Environ MV 46
Fire resistant
UCON Hydrolube HP-5046
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie
Product Support before use.
Optional fluids may not have
the same hydraulic lifespan and
may result in component
damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond its
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.