Seventh Edition • First Printing
Operator's Manual
Operating
Instructions
Part No. 1307436GT
Z
®
-45J DC • Z
®
-45J Bi-Energy
49
Tilt Sensor Activation Settings
Model
Chassis Angle
(side to side)
Chassis Angle
(front to back)
Z-45J DC
4.5°
2.5°
Z-45J BE
4.5°
2.5°
When the Machine On Incline
indicator light is on and the tilt
alarm sounds, the following
functions are affected; drive
functions are disabled.
Follow the Boom lowering
procedure (see Operating
Instructions) to restore drive
function.
When the machine is stowed, on a
slope, and the tilt alarm sounds,
the following functions are
affected; lift functions are disabled.
Return the machine to level
ground to restore lift functions.
AC Inverter (if equipped)
The inverter supplies power to
the platform when external AC
power is removed.
Plug the power to platform
cable on the machine into the
the inverter power cable.
Move the inverter switch up to activate the inverter.
Move the switch down to turn off the inverter. All
boom functions will operate while the inverter is
in use.
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, the Machine Not
Level indicator light will come on
and the drive function in one or both
directions will not operate. Identify
the condition of the boom on the
slope as shown below. Follow the
steps to lower the boom before
moving to a firm, level surface. Do
not rotate the boom while lowering.
If the tilt alarm sounds
with the platform uphill:
1
Lower the primary
boom.
2
Lower the secondary
boom.
3
Retract the primary
boom.
If the tilt alarm sounds
with the platform
downhill:
1
Retract the primary
boom.
2
Lower the secondary
boom.
3
Lower the primary
boom.
Содержание Genie Z-45 BE
