Seventh Edition • First Printing
Operator's Manual
Work Area Safety
Part No. 1307436GT
Z
®
-45J DC • Z
®
-45J Bi-Energy
21
Component Damage Hazard
Do not use any battery charger greater than 48V to
charge the batteries.
Both battery packs must be charged together.
Disconnect the battery pack plug before removing
the battery pack.
Electrocution/Burn Hazards
Connect the battery charger to a
grounded, AC 3-wire electrical
outlet only.
Inspect daily for damaged cords,
cables and wires. Replace
damaged items before operating.
Avoid electrical shock from contact with battery
terminals. Remove all rings, watches and other
jewelry.
Tip-over Hazard
Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weigh a minimum of 105 lbs /
47.6 kg. Each battery box including batteries must
weigh a minimum of 530 lbs / 240.4 kg.
Lifting Hazard
Use a forklift to remove or install a battery pack.
Lockout After Each Use
1
Select a safe parking location–firm level
surface, clear of obstruction and traffic.
2
Retract and lower the boom to the stowed
position.
3
Rotate the turntable so that the boom is
between the non-steer wheels.
4
Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
Содержание Genie Z-45 BE
