Terex Genie Z-45 BE, Руководство оператора

Страница: 33 / 65

Seventh Edition • First Printing Operator's Manual
Inspections
Part No. 1307436GT Z
®
-45J DC • Z
®
-45J Bi-Energy 31
Pre-operation Inspection

Be sure that the operator’s, safety, and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.

Be sure that all decals are legible and in place.
See Inspections section.

Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.

Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.

Bi-Energy models: Check for engine oil leaks
and proper oil level. Add oil if needed. See
Maintenance section.

Bi-Energy models: Check for engine coolant
leaks and proper level of coolant. Add coolant if
needed. See Maintenance section.
Check the following components or areas for
damage, improperly installed, or missing parts and
unauthorized modifications:

Electrical components, wiring, and
electrical cables

Hydraulic hoses, fittings, cylinders, and
manifolds

Hydraulic tank

Drive and turntable motors and drive hubs

Boom wear pads

Tires and wheels

Engine and related components (if
equipped)

Fuel tank (if equipped)

Limit switches and horn

Alarms and beacons (if equipped)

Nuts, bolts and other fasteners

Platform entry mid-rail or gate

Lanyard anchorage points
Check entire machine for:

Cracks in welds or structural components

Dents or damage to machine

Excessive rust, corrosion or oxidation

Verify that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.

Be sure that both battery packs are in place
and properly connected.

After you complete your inspection, be sure
that all compartment covers are in place and
latched.