Terex Genie Z-30N, Руководство оператора

Страница: 45 / 59

Seventh Edition • First Printing Operator's Manual
Operating Instructions
Part No. 1297932GT Z
®
-30/20N • Z
®
-30/20N RJ 43
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, use extreme
caution. The machine not level
indicator light will come on and the
drive function in one or both
directions will not operate. Identify
the condition of the boom on the
slope as shown below. Follow the
steps to lower the boom before
moving to a firm, level surface. Do
not rotate the boom while lowering.
If the tilt alarm sounds with
the platform uphill:
1 Lower the primary
boom.
2 Lower the secondary
boom.
3 Retract the primary
boom.
If the tilt alarm sounds with
the platform downhill:
1 Retract the primary
boom.
2 Lower the secondary
boom.
3 Lower the primary
boom.
Tilt Sensor Activation Settings
Model Chassis Angle
(side to side) Chassis Angle
(front to back)
Z-30N 4.5° 2.5°
Z-30N RJ 4.5° 2.5°
When the Machine On Incline
indicator light is on and the tilt
alarm sounds, the following
functions are affected; drive
functions are disabled.
To restore drive functions, follow
the boom lowering process,
explained in the previous
procedure.
When the machine is stowed, on a
slope, and the tilt alarm sounds,
the following functions are
affected; lift functions are
disabled.
Return the machine to level
ground to restore lift functions.