Terex Genie Z-30N, Руководство оператора

Страница: 30 / 59

Operator's Manual Seventh Edition • First Printing
Inspections
28 Z
®
-30/20N • Z
®
-30/20N RJ Part No. 1297932GT
At the Platform Controls
14 Turn the key switch to platform control.
15 Pull out the red Emergency Stop button to the
on position.
Result: The beacon (if equipped) should flash.
Test Emergency Stop
16 Push in the platform red Emergency Stop
button to the off position.
Result: No functions should operate.
Test the Horn
17 Pull out the red Emergency Stop button to the
on position.
18 Press the horn button.
Result: The horn should sound.
Test the Foot Switch
19 Do not press down the foot switch and test
each machine function.
Result: No functions should operate.
Test Machine Functions
20 Press down the foot switch.
21 Activate each machine function control handle
or toggle switch.
Result: All boom and platform functions should
operate through a full cycle.
Note: Control the speed of boom functions by
adjusting the boom function speed controller. Drive
and steer functions are not affected by the boom
function speed controller.
Test the Steering
22 Press down the foot switch.
23 Press the thumb rocker switch on top of the
drive control handle in the direction indicated
by the blue triangle on the control panel OR
slowly move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
24 Press the thumb rocker switch in the direction
indicated by the yellow triangle on the control
panel OR slowly move the control handle in
the direction indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
Test Drive and Braking
25 Press down the foot switch.
26 Slowly move the drive control handle in the
direction indicated by the blue arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the drive
chassis, then come to an abrupt stop.