Part No. 57.4400.9203 GTH-4016SR • GTH-4018SR
55
March 2010
REV A
Section 4 • Repair Procedures
3-1 How to Remove the Fuel Tank
and the Hydraulic Tank.
WARNING
Bodily injury hazard. This
procedure requires specific repair
skills, lifting equipment and a
suitable workshop. Attempting
this procedure without these skills
and tools could result in death
or serious injury and significant
component damage. Dealer
service is strongly recommended.
1. Close the oil intake valve.
2. Empty the tanks.
3. Remove all the screws.
4. Loosen all the clamps and pull out the hoses.
5. Disconnect the electrical wire.
6. Remove the electrical wire from bulb on the
hydraulic filter.
7. Place a container of suitable size under the
hydraulic piping before disconnecting
PROTECT THE
ENVIRONMENT
Used oils must be handled and
disposed of according to local
regulations. Address to legally
authorised centres
8. Disconnect all flexible hoses.
9. Remove the screws fixing the tanks to the turret
of the machine.
10. Fix the tanks assy firmly using some textile
bridles connected to the bridge crane, check
that all parts have been loosened, then raise
and lower the assy to the ground in a site
where it cannot hinder other operations.
Fuel and Hydraulic Tanks
Содержание Genie GTH4016 SR
Страница 4: ...iv GTH 4016SR GTH 4018SR Part No 57 4400 9203 March 2010 Intentionally blank page ...
Страница 12: ...xii GTH 4016SR GTH 4018SR Part No 57 4400 9203 March 2010 Intentionally blank page ...
Страница 92: ...80 GTH 4016SR GTH 4018SR Part No 57 4400 9203 March 2010 Section 5 Settings REV A Intentionally blank page ...
Страница 124: ......