Terex Genie GTH4016 SR, Руководство по обслуживанию

Страница: 43 / 124

Part No. 57.4400.9203 GTH-4016SR • GTH-4018SR 31
March 2010
REV A
Section 3 • Scheduled Maintenance Procedures
CHECKLIST C PROCEDURES
C-3
Change Engine Air Outer Filter
NOTICE
Engine specifications require
that this procedure be
performed semi-annually or
after 500 hours, whichever
comes first.
Required maintenance procedures and additional
engine information is available in the
Perkins 1104D Operation and Maintenance
Manual
C-4
Change Hydraulic Oil Filter
1. Stop the machine on a level ground and engage
the parking brake.
2. Place a container of suitable size under the filter to
collect any oil leaks.
3. Remove the filter cover to get access to the filter
element A.
4. Change the filter element, then, before fitting a
new one, thoroughly clean and grease both seat
and gasket.
5. Refit and tighten the filter cover.
NOTICE
The hydraulic oil filter cartridge
shall be replaced as soon as the
relative warning light comes on.
NOTICE
Hydraulic oil filter canisters cannot
be cleaned or washed and refitted.
They must be replaced with new
ones of the type recommended
by the manufacturer.
PROTECT THE
ENVIRONMENT
The handling and disposing of
used oils may be ruled by local
or national regulations. Address
to authorised centres.